Board - Concora

Article Index



code 100613
ISO 7263, TAPPI T809 SCAN P27

Used for sample preparation for the CMT and CCT-test

  • Vertical Fluter
  • Precise temperature control and regulation
  • Easy to operate
  • Power consumption: only 200 W
  • New heating system for low heat loss
  • Programmable temperature in digital display: 175 °C ± 8 °C

Test description

The prepared sample (for standard: 160 x 12,7 mm strips) is put in the upper opening. This strip is heated up to 175 °C between two corrugated discs, whereby the flute is formed and ejected from the instrument on the lower opening.
Using the included sample holder the self adhesive tape is applied to complete the sample preparation.

Technical Data

  • Temperature: 175 °C ± 8°
  • Heating energy: 200 W
  • Safety protection

General specification

The distance between teeth is 8.50 mm ± 0.05 mm and height of teeth 4.75 mm ± 0.05 mm. The comb has 10 projections of 19 mm long approx. and 3.4 mm ± 0.1 mm height. One of the rolls is operated by a motor-gear and rotates to a speed of 4.5 rpm ± 1 rpm and the other roller which is geared, makes a pressure on the diving of 100 N ± 10 N