We market measurement devices for quality control in the paper industry. We develop and produce a part of our equipment in France in our premises. The other part of our devices is manufactured in Europe by prestigious companies such as IGT Testing system or BTG.
Our devices are fully compliant with ISO standards. We have all the skills to offer you the necessary services over the life of our devices.
The Mütek™ PCD 05 Smart Particle Charge Detector measures the colloidally dis...
The Mütek™ PCD 05 LightS Particle Charge Detector measures the colloidally di...
This new design device allows you to cut simultaneously several test pieces of v...
Cut 100 cm² samples for grammage
For determination of the freeness and the drain ability speed of wood fibre, gro...
To prepare standard hand sheet in laboratory (diameter 200 mm)
Automatical mo...
For the determination of fibre length of pulp by classification.
For the rapid drying of hand sheets and for determining the dry content of other...
For determine the tearing resistance of paper and board
Digital equipment to determine the adhesion of internal layers on paper and pape...
For determination of the resistance of paper, according to the Schopper principl...
For determining the water absorbance of paper or board
With automatic clampin...
Dennison waxes are used to do the pinking test for coating paper.
For the evaluation of the stiffness according to the resonance length method
Used to measure the thickness of a sheet of paper.
Two models existing.
For determination of the bending strength and the bending stiffness of paper and...
To determine the paper porosity according to Gurley method. Two version, automoa...
Apparatus for determining the thickness of a sheet of corrugated cardboard.
<...To carry out different type of compression tests on paper and corrugated board.<...
For measuring the required energy to puncture corrugated board & cardboard
For measurement of the short & zero-span compression (SCT) on paper and board st...
For determination of the bursting strength resistance of corrugated board
Box and general packaging equipments with fixed plates and oscillating fixed pla...
For the preparation of corrugates samples for CMT and CCT tests
Board Cutter for 100 cm² circular sample for FCT test and grammage
Allows to cut samples of corrugated cardboard of big thickness for ECT.
The Mütek™ PCD 05 Smart Particle Charge Detector measures the colloidally dis...
The Mütek™ PCD 05 LightS Particle Charge Detector measures the colloidally di...
For determination of the freeness and the drain ability speed of wood fibre, gro...
To prepare standard hand sheet in laboratory (diameter 200 mm)
Automatical mo...
For the determination of fibre length of pulp by classification.
For the rapid drying of hand sheets and for determining the dry content of other...
The lab device BTG-Mütek™ DFR-05 Premium simulates the retention and drainage...
For the determination of the water retention ability of pulp samples.
WRV te...
For determination of shive content in pulp.
For the standardized disintegration of pulp suspension
The Mütek™ SZP-10 System Zeta Potential identifies the surface charges of fib...
The lab device BTG-Mütek™ DFR-05 HB is an ergonomic modern equipment that mea...
This new design device allows you to cut simultaneously several test pieces of v...
Cut 100 cm² samples for grammage
Board Cutter for 100 cm² circular sample for FCT test and grammage
To cut sample templates for rigidimeter and tear tester
Allows to cut samples of corrugated cardboard of big thickness for ECT.
For punching strips for the tensile tests
Sample cutter for strips of paper and board
upon request until from 10 to 295...
To prepare board samples to do ECT test.
Pour découper des bandes échantillons de largeur fixe 12.7 15, 25 ou 50 mm
Kern precision balance to measure cobb, paper weight, moisture.
For the IGT C1 and Orange proofer range. This scale accurately measures the tran...
